Handbrake Cable, 1977-on Rear Axle

Showing the rubber flap attached to a flange on the axle casing, to which a bracket on the handbrake cable is attached. The rear pivot and mounting for the anti-roll bar can be seen on top of the axle casing (top left), but other than both being attached to the tube in adjacent areas the two are entirely separate.

Showing the rear of the diff, where the handbrake pivot used to be, with the anti-roll bar well out of the way.

Showing the anti-roll bar, rear pivot on the axle casing, and front pivot mounting point on the body.